Thank you for the thoughtful reply. Maybe bins is the wrong word to use, so I'll try with intervals. Starting with 1 bit data, there are two numbers and one interval. I think where bins makes it confusing is that inside the interval there are two big rounding errors mapping everything to either 0 or 1 and many people seem to be considering those the bins.
Taking a step back, remember we're ultimately mapping these discrete numbers to some real world continuous variable like the saturation of red, frequency, mass on a scale, whatever. And our digital device can only represent a finite amount of numbers. For 2 bit data, we can represent 0-3, and for 3 bit data we can represent 0-7.
The important part is that 0 represents the minimum and 1,3, and 7 all represent the same maximum real value, and everything that can be measured by the device will fall within those ranges. So comparing 1, 2 and 3 bit data on a linear number line looks like this:
0 1
0 1 2 3
0 1 2 3 4 5 6 7
You could assume that everything gets assigned to whatever number is nearest in the number scale or come up with another scheme, but that is ultimately defined by the ADC and likely nonlinear. All we know is that those are the numbers we have available to represent the real values we're measuring.
The question is about how to normalize the data. 1 bit data is already normalized. If you normalize 2 bit data by 3 you get [0, 1/3, 2/3, 1]. LGTM. If you normalize it by 4, you get [0, 1/4, 2/4, 3/4] and you're effectively throwing away some of the range of the ADC. You can try to get it back by offsetting by 0.5 then normalizing but now you get [1/8, 3/8, 5/8, 7/8]. And you could stretch that with some clever formula to fill from 0 to 1, but if you do it right then it's the equivalent to normalizing by 3, so why not normalize by 3?
So the answer is, if you have N bit data, you normalize by 2^N-1.
Taking a step back, remember we're ultimately mapping these discrete numbers to some real world continuous variable like the saturation of red, frequency, mass on a scale, whatever. And our digital device can only represent a finite amount of numbers. For 2 bit data, we can represent 0-3, and for 3 bit data we can represent 0-7.
The important part is that 0 represents the minimum and 1,3, and 7 all represent the same maximum real value, and everything that can be measured by the device will fall within those ranges. So comparing 1, 2 and 3 bit data on a linear number line looks like this:
You could assume that everything gets assigned to whatever number is nearest in the number scale or come up with another scheme, but that is ultimately defined by the ADC and likely nonlinear. All we know is that those are the numbers we have available to represent the real values we're measuring.The question is about how to normalize the data. 1 bit data is already normalized. If you normalize 2 bit data by 3 you get [0, 1/3, 2/3, 1]. LGTM. If you normalize it by 4, you get [0, 1/4, 2/4, 3/4] and you're effectively throwing away some of the range of the ADC. You can try to get it back by offsetting by 0.5 then normalizing but now you get [1/8, 3/8, 5/8, 7/8]. And you could stretch that with some clever formula to fill from 0 to 1, but if you do it right then it's the equivalent to normalizing by 3, so why not normalize by 3?
So the answer is, if you have N bit data, you normalize by 2^N-1.