Definitely gives me second thoughts about getting one. They look like easiest way to get into 3d printing as a tool (rather than another hobby), but their recent attitude just makes me think I should suffer a bit less advanced product just to not have to deal with that shit.
There's some drama, and they did some wrong calls. But the hardware is still really fantastic (as a X1C owner). If you want to have some things printed and don't necessarily want fine tuning your printer as a hobby, I highly recommend it.
Same. I don't care about the online connectivity or whatever, I just print a few personal things every month so the convenience and reliability far outweigh any cons for me.
RE: 3D printer as a tool, I recommend Teaching Tech's video (1) as a guide to choosing the right 3D printer. His first question is "Will you use your 3D printer as a tool or a hobby?", followed by the priorities that flow from that choice, e.g. pretty looking prints, or accurate parts that fit together.
It is definitely a philosophy you have to buy into, in the same way that people accept the iPhone's walled garden. (I have several Bambu Lab printers and have been an iPhone user for 17 years)
Honestly I don't regret going with Bambu. Yes they suck in a way I get it. However the time and money I spent into my ender to keep it barely alive is all wasted compared to these machines that just run perfectly out of the package.
Sure prusa is fine too, and other brands might are getting there too. But if you want to print as a tool I would recommend to just use the tool nearly everyone is agreeing on.
I didn't regret it once, and have 3 printers at this point (2 of which free thanks to Bambu points)
Also I am still amazed that my $150 A1 mini is basically just as good as the X2D or P2S.
That comes with a big caveat. You can either choose to use the printer offline, or online, with no ability to use both. If you want the ability to monitor or pause a print when you're not home on the off chance something goes wrong, you HAVE to send every print through their cloud, there's no middle ground.
That's not Bambu being open, that's them doing the absolute minimum to allow people to say "you can use Bambu printers fully offline" in comment sections.
For most people, it is definitely a closed ecosystem, similar to the iPhone. But they do give people the escape hatch if they're willing to take ownership of the software they run. (To be fair, they only enabled this after a lot of backlash)
Willing to take ownership, and also forgo a lot of functionality that the device was billed as having when it was purchased. Defending Bambu here seems like the same mentality as supporting a manufacturer that implements a subscription model for heated seats in their cars. (Don't worry, we're an ethical manufacturer so we don't charge a premium for access to heated seats. As long as you have our app on your phone (requires location permissions) you'll be able to make use of them!)
A service is entirely different than a physical product. While I'm not necessarily on board with what Anthropic has been up to it's certainly more nuanced than a simple bait and switch as appears to have happened here.
Wait, that’s still just about their phone app. When you disable the cloud features, you lose the phone app, but otherwise the printer is fully usable. You can still connect to it through Bambu studio, you just have to roll your own networking (e.g. a VPN), right?
Yes and no, it seems. Yes in Developer Mode. With that configuration, which confusingly requires you to turn on LAN mode first, you can use your own software to control all features of the device.
In LAN mode it’s more complicated. LAN mode requires you to still use their slicer because the majority of functions beyond the extremely basic are still restricted by their authorization layer. This means using their SDK/network plugin for anything you develop, effectively coercing developers into their ecosystem for use-cases by the majority of users.
It seems pretty clear, in my opinion, that what they’re trying to communicate by using the “developer mode” language is that owning your device end-to-end is big, scary, and only for professionals. Oh, btw, developer mode leaves your device completely open and introduces various UX friction points to the experience related to constantly needing to rebind. Effectively it’s malicious compliance on their end. They’re giving the middle finger to anyone who wants to cut them out, and it’s hard to say anyone who feels that way is imagining it.
If you’ve got the spare time and spare change to set up and coddle a 3d printing hobby you absolutely have the skills and funds to set up Tailscale on a $100 mini pc.
There is a lot of overlap between people who have a NAS and those with a 3D printer.
